It is never an exciting thing to discover a leak in your roof. Unfortunately, this can happen to any roof at any time and is even more likely if you have a chimney. Poorly installed or damaged chimney flashing is a very common cause for leaks found in the house. If it’s in your budget, you should seek out professional Passaic County chimney flashing repair work. However, if you’re comfortable working on your roof, you may be able to do it yourself and save some money. Here’s how it all works.

Passaic County Chimney Flashing Repair Steps

1. Remove Shingles and Flashing – This is your first step after safely getting onto your roof and taking the proper safety precautions. The shingles that you remove will need to be replaced afterwards as well. Take off however much is necessary to access all of the flashing that you need to reach. Once you get to the flashing, you should carefully remove it with a pry bar and hammer.

2. Replace Shingles – After all of the old stuff has been done away with, it’s time to put new shingles in. Carefully install new shingles up and around the base the chimney starting from the bottom.

3. Install the Flashing – You want to begin installing the flashing with the base of it. It will go at the bottom of the chimney and overtop of the shingles. After the bottom has been covered, begin working your way up the side with step flashing. Be sure to overlap the step flashing as this will redirect water to go over the shingles. Next, you will take the front cap flashing and bend it around the chimney. It is easiest to do this with flashing that is pre-measured, but can still be done if you did not get the measurements. You will then install the flashing around the sides and bend another piece of cap flashing over the back. When you’re finished installing everything, you can finalize it by sealing it with caulk.

Installing chimney flashing is by no means an easy task, especially if you are untrained in what to do. More often than not, it is worth the money to hire a professional Passaic County chimney flashing contractor.

Do You Need Passaic County Chimney Flashing Repair?

It is important to make sure your roof doesn’t leak, especially in these rainy summer months. If your flashing is damaged, you need to get Passaic County chimney flashing work before more damage is done to your home. If you’re looking for a contractor with a strong reputation and experience in roofing work, look no further than Deegan Roofing. For over 25 years Deegan has provided NJ homeowners with exceptional roofing work. For more information, call today or visit the website!

NJ Roofing Contractor

nj seo company